The Seeker 4 pro is a versatile high-performance flashlight for all types of uses. When at high-output, the seeker 4 makes a capable searchlight. At lower outputs, it can last for 15 days to keep light in a little area. It locks out after a little period of no use, and has a proximity sensor to make sure safety.
- Cool white light for better concentration
- 4,600 lumen maximum output
- Rotary knob permitting for variable brightness levels
- Matte black aluminum handle.
- Smart lockdown
Features
Seeker 4 pro is furnished with both a push and rotary switch that works like a dimmer, thanks to which the light output of the lamp can be infinitely adjusted. The simple-to-use double switch permits the lamp to be operated with single hand without having to shift your gaze from the object to the lamp for a moment. Further, Seeker Pro 4 is the primary flashlight on the market that uses Laser Microperforation technology in its production, which creates little holes in the metal body of the lamp for translucent and clear indicators. The indicators presents both the power mode in use and the battery charge status, so you forever stay on the map of both the power mode in use and the status of the battery.
Being water and dust resistant, it can withstand varying situations and submersion to a depth of up to two meters. The Seeker 4 pro is a best option for every person who is looking for an extremely durable easy-to-use, top performance flashlight with a long lasting operating time that will not fail in any condition.
The lamp is equipped with a fully new and multi-objective belt case, which links the light to the key lock every time the lamp is placed in it. If the lamp is located in the housing while it is on, the light output mechanically drops below 600 lumens, so that the high light power produced by the lamp does not cause damage to nearby clothes. For example, the case works as a charging dock, and the light is also supplied with a convenient wall bracket.
Seeker 4 pro works with one 21700 li-ion battery, which as usual, for olight, can be charged straight inside the lamp through the lamp magnetic end cap with the MCC3 charging cable. The battery can also be charged with the USB-C charging cable by locating the lamp in the belt holster. Either way, charging is effortless and fast, and the status of the battery charge can be checked from the indicators next to the switch.
Additional features
Unscrew the end, and get rid of the insulating plastic between the battery and the end cap. The lamp is delivered with the key lock linked. Open the key lock by turning the rotary switch 90 in either direction, or by griping down the push switch for more than one second.
On/off: Turn the light off or on briefly pressing the power switch. Last used power mode pl. turbo remains in the lamps memory. High power mode remains in the lamp memory for one minute after switching off, after which the lamp lights up in medium mode when switched on.
Turbo: click the switch twice a row. Press and grip the switch to other power modes, or twin click the switch again to turn to the previous mode.
Replacing the operating mode: When the light is on, press and grip the switch, the power mode, will cycle in the following order: Low > Medium> High> Low. Release the switch when the wanted power mode is active.
Strobe: Press the switch immediately 3 times in a row. Press the switch once or grip down to exit strobe mode.
Key lock: The key lock is mechanically activated if the lamp is not used for ten seconds. When the key lock is on, when the switch is pressed, the lamp does not glow up, but shows the battery charge status. The key lock opens by turning rotary switch 90.
Timer: The lamp has a timer that starts the lamp off either three or nine minutes after the timer is activated. When the lighting is on, double-click and hold down the switch with a second click to access the timer settings. One flash means a three mint timer is picked, while two flashes means a nine minute timer.
How to use the case: When the light turned off, remove the light from the case to unlock the key lock. Add the switched-off lamp back in the case to activate the key lock.
Charging: Locate the lamp in the case and connect one end of the USB-C charging cable to the charging port in the case and the other end e.g. mains adapter or computer USB port. The lamp can also be charged without the case through the lights magnetic end cap with the MCC3 charging cable.
Counter-clockwise rotation: Adjust the light output steplessly lower by rolling the counterclockwise switch. The power mode indicator next to the switch point out which power mode is in use. Moonlight mode cannot be activated by rolling the rotary switch.
Clockcwise rotation: Adjust the light output steplessly higher by using the rotary switch close wise. The power mode indicator next to the switch point out which power mode is in use.
End words
Olight seeker 4 pro is the latest and most strong mode of its manufacturers famous and long-honed seeker edition, which provides an unimaginable highest light output of 4,600 lumens in a compact size and a gathered light beam that reaches up to 260 meters. The lamp works like its predecessor with a top performance 5000 mAh lion-battery.
The lamp efficient LEDs gathered with the optical TIR lens creates a high standard combination beam that illuminate an extremely wide area both widthwise and lengthwise. The remarkable performance is crowned by the remarkable little size of the lamp; this lamp fits in the hand like a nose to the head, so we can warmly advise it for both demanding professional use and the role of general lighting for any person.